manualshive.com logo in svg

Ford 2013 Fiesta, Owner'S Manual

Get your hands on the comprehensive Owner's Manual for the Ford 2013 Fiesta and unleash the full potential of your vehicle. This essential manual is available for free download at manualshive.com, providing you with the key information and guidelines to maximize your driving experience.

Share
Download
background image

CHANGING THE WIPER BLADES

1. Pull the wiper arm away from the
windshield.

2. Press the locking button.

3. Remove the wiper blade.

Note:

Make sure the wiper blade locks into place.

Replace wiper blades at least once per year for optimum performance.

Poor wiper quality can be improved by cleaning the wiper blades and the
windshield.

To prolong the life of the wiper blades, it is highly recommended to
scrape off the ice on the windshield before turning on the wipers. The
layer of ice has many sharp edges and can damage the micro edge of the
wiper rubber element.

Changing Rear Window Wiper Blade

To replace the rear wiper blade:

1. Lift and hold the wiper blade off
the glass.

2. Position the wiper blade at right angles to the wiper arm.

3. Disengage the wiper blade from the wiper arm.

4. Remove the wiper blade.

Note:

Make sure that the wiper blade locks into place.

Install the wiper blade in the reverse order.

3

2

3

4

2

210

Maintenance

2013 Fiesta

(fie)

Owners Guide gf, 2nd Printing
USA

(fus)

Summary of Contents for 2013 Fiesta



























































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Fiesta

Jeep Commander Overview Manual preview
Commander
Brand: Jeep Pages: 25
Jeep Commander Warranty Information Booklet preview
Commander
Brand: Jeep Pages: 51
Farenheit CCD-5XS Owner'S Manual preview
CCD-5XS
Brand: Farenheit Pages: 8
Porsche 911 GT3R 2010 Technical Manual preview
911 GT3R 2010
Brand: Porsche Pages: 144
Chevrolet 2013 Spark Owner'S Manual preview
2013 Spark
Brand: Chevrolet Pages: 356
Ford Zephyr 2007 Owner'S Manual preview
Zephyr 2007
Brand: Ford Pages: 272
Pontiac 2004 Sunfire Owner'S Manual preview
2004 Sunfire
Brand: Pontiac Pages: 376
Jeep COMPASS 2018 Owner'S Manual preview
COMPASS 2018
Brand: Jeep Pages: 712
Kuda-Phonebase 055040 Installation Instruction preview
055040
Brand: Kuda-Phonebase Pages: 3
Daewoo RACER 1998 Electrical Wiring Diagram preview
RACER 1998
Brand: Daewoo Pages: 68
Hyundai Getz 2004 Owner'S Manual preview
Getz 2004
Brand: Hyundai Pages: 437
Webasto Transit Vancouver Wagon Manual preview
Transit Vancouver Wagon
Brand: Webasto Pages: 44
Phonocar VM338 Mounting Instructions preview
VM338
Brand: Phonocar Pages: 6
GMC Chevrolet Silverado 2500HD 2021 Owner'S Manual preview
Chevrolet Silverado 2500HD 2021
Brand: GMC Pages: 433
Rago FABRICATION R2223TTUNDM Installation Manual preview
R2223TTUNDM
Brand: Rago FABRICATION Pages: 10
Van Guard VG273 Fitting Instructions preview
VG273
Brand: Van Guard Pages: 3
Metra Electronics 99-5819 Installation Instructions Manual preview
99-5819
Brand: Metra Electronics Pages: 8
travall TDG-1301 Fitting Instruction preview
TDG-1301
Brand: travall Pages: 2

Brands by name

Popular brands

Load more brands