manualshive.com logo in svg

Ford 2013 Fiesta, Owner'S Manual

Get your hands on the comprehensive Owner's Manual for the Ford 2013 Fiesta and unleash the full potential of your vehicle. This essential manual is available for free download at manualshive.com, providing you with the key information and guidelines to maximize your driving experience.

Share
Download
background image

Integrated Keyhead Transmitter (IKT)

1. Carefully insert a flat object, such
as a screwdriver, into the recess on
the back of the key and remove the
key blade.

2. Release the retaining clips with a
flat object and separate the two
halves of the transmitter.

3. Carefully pry out the battery with
a flat object. Be careful not to touch
the battery contacts or the printed
circuit board with the flat object.

4. Insert the new battery with the

+

facing upwards.

5. Snap the two halves of the
transmitter back together.

Keys and Remote Control

59

2013 Fiesta

(fie)

Owners Guide gf, 2nd Printing
USA

(fus)

Summary of Contents for 2013 Fiesta



























































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Fiesta

Jeep PATRIOT 2013 Specifications preview
PATRIOT 2013
Brand: Jeep Pages: 5
Jeep PATRIOT 2012 Specifications preview
PATRIOT 2012
Brand: Jeep Pages: 6
Jeep Grand Cherokee SRT 2014 Operating Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 345
Jeep Grand Cherokee 2015 User Manual preview
Grand Cherokee 2015
Brand: Jeep Pages: 236
Jeep Grand Cherokee Quick Manual To Repairs preview
Grand Cherokee
Brand: Jeep Pages: 18
Jeep Grand Cherokee Quick Reference Manual preview
Grand Cherokee
Brand: Jeep Pages: 24
Jeep Compass 2015 Owner'S Manual preview
Compass 2015
Brand: Jeep Pages: 560
Jeep Compass 2013 Owner'S Manual preview
Compass 2013
Brand: Jeep Pages: 525
Jeep Cherokee 2019 User Manual preview
Cherokee 2019
Brand: Jeep Pages: 308
Jeep CHEROKEE 2017 Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 86
Jeep CHEROKEE 2017 Owner'S Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 638
Jeep 2022 CHEROKEE Quick Start Manual preview
2022 CHEROKEE
Brand: Jeep Pages: 9
Jeep 2014 Patriot Service Information preview
2014 Patriot
Brand: Jeep Pages: 51
Jeep Jeep Wrangler Buyer'S Manual preview
Jeep Wrangler
Brand: Jeep Pages: 4
Jeep Jeep Wrangler Owner'S Manual Supplement preview
Jeep Wrangler
Brand: Jeep Pages: 50
Jeep Grand Cherokee SRT 2014 Owner'S Manual preview
Grand Cherokee SRT 2014
Brand: Jeep Pages: 118
Jeep 2014 Grand Cherokee Accessories Quick Reference Manual preview
2014 Grand Cherokee
Brand: Jeep Pages: 24
Jeep Grand Cherokee Specfications preview
Grand Cherokee
Brand: Jeep Pages: 8

Brands by name

Popular brands

Load more brands