manualshive.com logo in svg

Ford 2013 Fiesta, Owner'S Manual

Get your hands on the comprehensive Owner's Manual for the Ford 2013 Fiesta and unleash the full potential of your vehicle. This essential manual is available for free download at manualshive.com, providing you with the key information and guidelines to maximize your driving experience.

Share
Download
background image

WARNING:

To reduce the risk of personal injury, make sure the

engine is cool before unscrewing the coolant pressure relief cap.

The cooling system is under pressure; steam and hot liquid can come
out forcefully when the cap is loosened slightly.

WARNING:

Do not add coolant further than the MAX mark.

Note:

Do not use stop leak pellets or cooling system sealants/additives

as they can cause damage to the engine cooling and/or heating systems.
This damage would not be covered under your vehicle’s warranty.

Note:

During normal vehicle operation, the engine coolant may change

color from orange to pink or light red. As long as the engine coolant is
clear and uncontaminated, this color change does not indicate the engine
coolant has degraded nor does it require the engine coolant to be
drained, the system to be flushed, or the engine coolant to be replaced.

•

DO NOT MIX different colors or types of coolant in your vehicle. Make
sure the correct coolant is used. Mixing of engine coolants may harm
your engine’s cooling system. The use of an improper coolant may
harm engine and cooling system components and may void the
warranty.

•

In case of emergency, a large amount of water without engine coolant
may be added in order to reach a vehicle service location. In this
instance, the cooling system must be drained, chemically cleaned with
Motorcraft® Premium Cooling System Flush, and refilled with
prediluted engine coolant as soon as possible. Water alone (without
engine coolant) can cause engine damage from corrosion, overheating
or freezing.

•

Do not use alcohol, methanol, brine or any engine coolants mixed with
alcohol or methanol antifreeze (coolant). Alcohol and other liquids can
cause engine damage from overheating or freezing.

•

Do not add extra inhibitors or additives to the coolant. These can be
harmful and compromise the corrosion protection of the engine
coolant.

Unscrew the cap slowly. Any pressure will escape as you unscrew the
cap.

Add prediluted engine coolant meeting the Ford specification. See

Capacities and Specifications

for more information.

204

Maintenance

2013 Fiesta

(fie)

Owners Guide gf, 2nd Printing
USA

(fus)

Summary of Contents for 2013 Fiesta



























































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 Fiesta

Jabra FREEWAY Datasheet preview
FREEWAY
Brand: Jabra Pages: 2
Jabra BT330 User Manual preview
BT330
Brand: Jabra Pages: 38
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
TATA Motors Sumo Victa EX Owner'S Manual & Service Book preview
Sumo Victa EX
Brand: TATA Motors Pages: 92
Skoda OCTAVIA - TECHNICAL CHANGES 11-2009 Owner'S Manual Supplement preview
OCTAVIA - TECHNICAL CHANGES 11-2009
Brand: Skoda Pages: 16
v.link NAL-PC-HSD Manual preview
NAL-PC-HSD
Brand: v.link Pages: 21
Jaeger 21010508J Fitting Instructions Manual preview
21010508J
Brand: Jaeger Pages: 14
Waeco MagicSafe MSG150 Installation And Operating Manua preview
MagicSafe MSG150
Brand: Waeco Pages: 20
Cadillac 2005 XLR Owner'S Manual preview
2005 XLR
Brand: Cadillac Pages: 438
Stanley GLPS Instruction Manual preview
GLPS
Brand: Stanley Pages: 6
Valeo MBHL Operating Manual preview
MBHL
Brand: Valeo Pages: 29
Mercedes-Benz G 55 AMG Operator'S Manual preview
G 55 AMG
Brand: Mercedes-Benz Pages: 284
Saab 9-3 M03- Installation Instructions Manual preview
9-3 M03-
Brand: Saab Pages: 16
Dodge 2005 Sprinter User Manual preview
2005 Sprinter
Brand: Dodge Pages: 60
BENDIX C-5 CUT OUT COCK Manual preview
C-5 CUT OUT COCK
Brand: BENDIX Pages: 2
ACV 381178-12 Installation Manual preview
381178-12
Brand: ACV Pages: 2
Bracketron MVM Multi Vehicle Mount MVM-45-05 Installation Manual preview
MVM Multi Vehicle Mount MVM-45-05
Brand: Bracketron Pages: 4

Brands by name

Popular brands

Load more brands