Ford 2013 Fiesta Owner'S Manual Download

Page: 114 / 346

SIRIUS® Troubleshooting Tips

Radio Display

Condition

Possible Action

Invalid Channel

The channel is no
longer available.

Tune to another
channel or choose
another preset.

Unsubscribed Channel

Your subscription does
not include this
channel.

Contact SIRIUS® at
1–888–539–7474 to
subscribe to the
channel, or tune to
another channel.

No Signal

The signal is lost from
the SIRIUS satellite or
SIRIUS tower to your
vehicle antenna.

The signal is blocked.
When you move into
an open area, the
signal should return.

Updating

Update of channel
programming in
progress.

No action required.
The process may take
up to three minutes.

Call SIRIUS®
1–888–539–7474

Your satellite service is
no longer available.

Call SIRIUS at
1–888–539–7474 to
resolve subscription
issues.

No Channels Available

All the channels in the
selected channels are
either skipped or
locked.

Use the channel guide
to turn off the Lock or
Skip function on that
station.

Subscription Updated

SIRIUS has updated
the channels available
for your vehicle.

No action required.

Audio System

113

2013 Fiesta

(fie)

Owners Guide gf, 2nd Printing
USA

(fus)

Summary of Contents for 2013 Fiesta



























































































































































































































































































































































Search results

Summary of Contents for 2013 Fiesta

Reviews:

Related manuals for 2013 Fiesta

Brands by name

Popular brands

Ford 2013 Fiesta, Owner'S Manual

Search results

Summary of Contents for 2013 Fiesta

Reviews:

Related manuals for 2013 Fiesta

Brands by name

Popular brands