Ford 2013 EXPEDITION Owner'S Manual Download

Page: 82 / 515

ADJUSTING THE STEERING WHEEL

WARNING:

Do not adjust the steering wheel when your vehicle

is moving.

1. Pull and hold the steering wheel
release lever.

2. Adjust the steering wheel to the
desired position then release the
lever.

AUDIO CONTROL

A. Media

B. Volume up

C. Volume down

D. Seek down or previous

E. Seek up or next

Media

Press the media button repeatedly to scroll through available audio
modes.

Seek, Next or Previous

Press the seek button to:

•

tune the radio to the next or previous stored preset

•

play the next or previous track.

Press and hold the seek button to:

•

tune the radio to the next station up or down the frequency band

•

seek through a track.

Steering Wheel

2013 Expedition

(exd)

Owners Guide gf, 3rd Printing, April 2013
USA

(fus)

Summary of Contents for 2013 EXPEDITION




































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 EXPEDITION

Reviews:

Related manuals for 2013 EXPEDITION

Brands by name

Popular brands

Ford 2013 EXPEDITION, Owner'S Manual

Search results

Summary of Contents for 2013 EXPEDITION

Reviews:

Related manuals for 2013 EXPEDITION

Brands by name

Popular brands