Ford 2013 EXPEDITION Owner'S Manual Download

Page: 318 / 515

Replacing Front Parking Lamp, Turn Signal, and Side Marker Bulbs

1. Make sure that the headlamp control is in the off position.

2. Open the hood.

3. At the back of the headlamp,
remove the two headlamp assembly
retainer bolts.

4. Slide headlamp assembly forward
and off the retaining tab to expose
the back of the headlamp assembly.

5. Rotate the bulb socket
counterclockwise and remove from
the lamp assembly.

6. Carefully pull the bulb out of the
socket and push in the new bulb.

7. Install the bulb socket into the
lamp assembly and rotate clockwise.

8. Install the headlamp assembly
and secure with two retainer bolts.

Maintenance

317

2013 Expedition

(exd)

Owners Guide gf, 3rd Printing, April 2013
USA

(fus)

Summary of Contents for 2013 EXPEDITION




































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 EXPEDITION

Reviews:

Related manuals for 2013 EXPEDITION

Brands by name

Popular brands

Ford 2013 EXPEDITION, Owner'S Manual

Search results

Summary of Contents for 2013 EXPEDITION

Reviews:

Related manuals for 2013 EXPEDITION

Brands by name

Popular brands