To program additional personal entry codes, repeat Steps 1–3, then for
Step 4:
•
press
3
•
4
to save personal entry code 2, or
•
press
5
•
6
,
7
•
8
, or
9
•
0
to save personal entry code 3.
Tips:
•
Do not set a code that uses five of the same number.
•
Do not use five numbers in sequential order.
•
The factory-set code will work even if you have set your own personal
code.
Programming Memory to a Personal Entry Code
To program a personal entry code to recall a driver memory setting,
repeat Steps 1–4 above.
•
Pressing
1
•
2
on the keypad in Step 4 will program the code to driver
memory setting 1.
•
Pressing
3
•
4
in Step 4 will program the code to driver memory
setting 2.
Note:
Pressing
5
•
6
,
7
•
8
, or
9
•
0
keypad numbers in Step 4 will not
program the code to recall a driver memory setting.
Note:
The factory-set code cannot be associated with a memory setting.
Erasing a Personal Code
1. Enter the factory-set 5-digit code.
2. Press and release the
1
•
2
on the keypad within five seconds. The
doors will lock and then unlock to confirm that the system is in
programming mode.
3. Press and hold the
1
•
2
for two seconds. You must do this within five
seconds of completing Step 2.
All personal codes are now erased and only the factory-set 5-digit code
will work.
Locks
75
2013 Expedition
(exd)
Owners Guide gf, 3rd Printing, April 2013
USA
(fus)
