Ford 2013 EXPEDITION Owner'S Manual Download

Page: 176 / 515

Placing the Second Row Outboard 40% Seats in Cargo Mode

WARNING:

Use caution when folding the seat back to the flat

back position as the system will move forward when you lift the

release handle.

WARNING:

Always return the seat from the kneel position prior

to raising the seat back. Failure to do so could result in personal

injury.

Place the second-row seats in a kneel down load floor position to allow
more cargo space.

To place the seats in the cargo mode:

1. Fold down the second row seat.

2. Pull the cargo mode lever up to
release the seat into a kneel down
load floor position.

Seats

175

2013 Expedition

(exd)

Owners Guide gf, 3rd Printing, April 2013
USA

(fus)

Summary of Contents for 2013 EXPEDITION




































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 EXPEDITION

Reviews:

Related manuals for 2013 EXPEDITION

Brands by name

Popular brands

Ford 2013 EXPEDITION, Owner'S Manual

Search results

Summary of Contents for 2013 EXPEDITION

Reviews:

Related manuals for 2013 EXPEDITION

Brands by name

Popular brands