manualshive.com logo in svg

Ford 2013 EXPEDITION, Owner'S Manual

The Ford 2013 EXPEDITION Owner's Manual is available for download, absolutely free, on manualshive.com. This comprehensive manual provides essential information for owners of the Ford 2013 EXPEDITION, helping them understand and operate their vehicle effectively. Simply visit our website to easily download your copy and maximize your driving experience.

Share
Download
background image

2. Locate handle on the side of the
seat cushion by the door.

3. Pull up on the handle and push
the seat back forward toward the
front of the vehicle.

To return the seat to the upright position:

1. Lift the seat back toward the rear
of the vehicle.

2. Rotate the seat back until you
hear a click, locking it in the upright
position.

3. Lift up on the head restraint until
it locks into its original position.

174

Seats

2013 Expedition

(exd)

Owners Guide gf, 3rd Printing, April 2013
USA

(fus)

Summary of Contents for 2013 EXPEDITION




































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 EXPEDITION

AccuAir AA-4397 Installation Manual preview
AA-4397
Brand: AccuAir Pages: 40
Peak PKC0RG Owner'S Manual preview
PKC0RG
Brand: Peak Pages: 10
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
EZTRUNK PHANTOM JK Assembly Manual preview
PHANTOM JK
Brand: EZTRUNK Pages: 3
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
STO N SHO SNS135a Installation Procedures Manual preview
SNS135a
Brand: STO N SHO Pages: 7
Fab Fours VI-COWL Installation Instructions Manual preview
VI-COWL
Brand: Fab Fours Pages: 19
U.S. General 96524 Set Up And Operating Instructions Manual preview
96524
Brand: U.S. General Pages: 8
WABCO Truck Training Model Operating Instructions Manual preview
Truck Training Model
Brand: WABCO Pages: 56
Camoplast T4S Installation Manuallines preview
T4S
Brand: Camoplast Pages: 19
Thule 1809 Instruction Manual preview
1809
Brand: Thule Pages: 4
Billien OBU 5050 Quick Installation Manual preview
OBU 5050
Brand: Billien Pages: 2
Lexus ES 2021 Quick Manual preview
ES 2021
Brand: Lexus Pages: 28
Honda 2000 Accord Sedan Online Reference Owner'S Manual preview
2000 Accord Sedan
Brand: Honda Pages: 320
Brodit Getac T800 Quick Start Manual preview
Getac T800
Brand: Brodit Pages: 2
Saturn 2009 OUTLOOK Owner'S Manual preview
2009 OUTLOOK
Brand: Saturn Pages: 432

Brands by name

Popular brands

Load more brands