Recalling Saved Memory Positions
To recall position 1 settings, press and release memory button 1. The
memory features will move to the saved memory 1 position.
The memory positions can also be recalled when you:
•
press your remote entry transmitter unlock control (if the transmitter
is programmed to a memory position) or,
•
enter a valid personal entry code that is programmed to a memory
position.
If you enable the easy entry and exit feature, the mirrors and pedals will
move to the programmed memory position and the seat will move to the
easy entry position. The seat will move to the driving memory position
when the ignition is activated.
You can recall a programmed memory position:
•
in any gearshift position if the ignition is not on.
•
only in position
P
or
N
if the ignition is on.
Easy Entry and Exit Feature (If Equipped)
If the easy entry and exit feature is enabled, this feature automatically
moves the driver’s seat rearward 2 inches (5 centimeters) when the
transmission selector lever is in position
P
and the key is removed from
the ignition.
If the seat is located less than 2 inches (5 centimeters) from the rear of
the seat track, the seat travel will be less than 2 inches (5 centimeters)
rearward.
The driver’s seat will return to the previous position when the key is put
in the ignition.
This feature is enabled or disabled through the information display. See
the
Information Displays
chapter for more information.
170
Seats
2013 Expedition
(exd)
Owners Guide gf, 3rd Printing, April 2013
USA
(fus)
