manualshive.com logo in svg

Ford 2013 EXPEDITION, Owner'S Manual

The Ford 2013 EXPEDITION Owner's Manual is available for download, absolutely free, on manualshive.com. This comprehensive manual provides essential information for owners of the Ford 2013 EXPEDITION, helping them understand and operate their vehicle effectively. Simply visit our website to easily download your copy and maximize your driving experience.

Share
Download
background image

GENERAL INFORMATION

Note:

Occasional brake noise is normal. If a metal-to-metal, continuous

grinding or continuous squeal sound is present, the brake linings may be
worn out and should be inspected by an authorized dealer. If your
vehicle has continuous vibration or shudder in the steering wheel while
braking, you should take it to an authorized dealer for inspection.

Note:

Brake dust may accumulate on the wheels, even under normal

driving conditions. Some dust is inevitable as the brakes wear and does
not contribute to brake noise. See the

Vehicle Care

chapter for wheel

cleaning instructions.

See the

Instrument Cluster

chapter for information on the

brake system warning light.

Wet brakes result in reduced braking efficiency. Gently press the brake
pedal a few times when driving from a car wash or standing water to dry
the brakes.

Brake Over Accelerator

In the event the accelerator pedal becomes stuck or entrapped, apply
steady and firm pressure to the brake pedal to slow your vehicle and
reduce engine power. If you experience this condition, apply the brakes
and bring your vehicle to a safe stop. Turn the engine off, shift to
position

P

and apply the parking brake, then inspect the accelerator

pedal for any interferences. If none are found and the condition persists,
have your vehicle towed to the nearest authorized dealer.

Anti-Lock Brake System

This system helps you maintain steering control during emergency stops
by keeping the brakes from locking.

The anti-lock brake system lamp momentarily illuminates when
the ignition is turned on. If the light does not illuminate during
start-up, remains on or flashes, the anti-lock brake system may
be disabled and may need to be serviced.

If the anti-lock brake system is disabled, normal braking is still
effective. If the brake warning lamp illuminates with the parking
brake released, have your brake system serviced immediately.

Brakes

231

2013 Expedition

(exd)

Owners Guide gf, 3rd Printing, April 2013
USA

(fus)

Summary of Contents for 2013 EXPEDITION




































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2013 EXPEDITION

Saab 99 Important Operatlng, Safety And Maintenance Instructions preview
99
Brand: Saab Pages: 75
Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
EEZ RV 51 SC Instruction Manual preview
51 SC
Brand: EEZ RV Pages: 31
TBC 645624 Instruction Manual preview
645624
Brand: TBC Pages: 12
Prorack K194 Fitting Instructions For Basic Carrier preview
K194
Brand: Prorack Pages: 14
Dodge Challenger 2013 Owner'S Manual preview
Challenger 2013
Brand: Dodge Pages: 543
Hyundai Entourage 2008 Quick Reference Manual preview
Entourage 2008
Brand: Hyundai Pages: 11
A-Tach Mounts 50232 Instructions preview
50232
Brand: A-Tach Mounts Pages: 2
Webasto HOLLANDIA 700 - 20 Series Service Manual preview
HOLLANDIA 700 - 20 Series
Brand: Webasto Pages: 30
Rugged Ridge 13551.33 Manual preview
13551.33
Brand: Rugged Ridge Pages: 3
AD Boivin ZX2 2008 Adjustment Manual preview
ZX2 2008
Brand: AD Boivin Pages: 37
Front Runner LATF002 Quick Start Manual preview
LATF002
Brand: Front Runner Pages: 7
Audiovox Auto Security AA-9103N Installation Manual preview
Auto Security AA-9103N
Brand: Audiovox Pages: 1
Hama 00046080 Instructions For Use preview
00046080
Brand: Hama Pages: 2
Witter DT144AU Fitting Instructions preview
DT144AU
Brand: Witter Pages: 2
Davis Instruments 8126VSS Installation Manual preview
8126VSS
Brand: Davis Instruments Pages: 16
Chevrolet 2003 Malibu Owner'S Manual preview
2003 Malibu
Brand: Chevrolet Pages: 354
Hamron 007330 Operating Instructions Manual preview
007330
Brand: Hamron Pages: 7

Brands by name

Popular brands

Load more brands