Ford 2013 EXPEDITION Owner'S Manual Download

Page: 148 / 515

Connecting an MP3 Device

Using a USB Cable

Plug the MP3 Dock Connector to USB cable into a high-power USB port
on your DVD-headrest module, and then connect the other end to the
player.

See the documentation that came with your device for more information.

Charging the MP3 Player Battery

After you turn the DVD-headrest module on, connect the device to the
USB port on your DVD-headrest module

Note:

Not all devices are able to charge when connected to the USB

port.

Using an A/V Cable

1. Connect the device to the headphone port using an A/V cable.

Note:

Use the A/V cable made specifically for the device. Other

similar RCA-type cables might not work.

2. Connect the video and audio connectors to the AV-IN ports on your

DVD-headrest module, matching the yellow, red and white
connectors to the appropriate jacks.

Troubleshooting

Symptom

Possible cause

The device does not
power on.

Your vehicle ignition is not on.

The remote control does not have batteries
installed.

The infrared sensor is
inoperative.

The batteries in the remote control are not
working.

The remote sensor eye is blocked.

The infrared transmitter is blocking the sensor
eye of the component to be controlled

The disc does not play. You inserted the disc backward.

The disc is defective. Try another disc.

The disc is not compatible with the
entertainment system.

The device code and disc region code do not
match. This device is set to Region 1.

Audio System

147

2013 Expedition

(exd)

Owners Guide gf, 3rd Printing, April 2013
USA

(fus)

Summary of Contents for 2013 EXPEDITION




































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2013 EXPEDITION

Reviews:

Related manuals for 2013 EXPEDITION

Brands by name

Popular brands

Ford 2013 EXPEDITION, Owner'S Manual

Search results

Summary of Contents for 2013 EXPEDITION

Reviews:

Related manuals for 2013 EXPEDITION

Brands by name

Popular brands