manualshive.com logo in svg

Ford 2010 Transit Connect, Owner'S Manual

The Ford 2010 Transit Connect is a versatile and reliable commercial vehicle designed to meet the needs of entrepreneurs and small business owners. With its spacious interior and efficient engine, this vehicle is ideal for cargo transportation. Ensure you fully understand its features and maintenance requirements by downloading the free Owner's Manual from manualshive.com.

Share
Download
background image

•

If the oil level is

between the

MIN and MAX marks

, the oil

level is acceptable.

DO NOT

ADD OIL.

•

If the oil level is below the MIN
mark, add enough engine oil to
raise the level within the MIN and
MAX range. Refer to

Adding

engine oil

in this chapter.

•

Oil levels above MAX mark
may cause engine damage.

If

the engine is overfilled, some oil
must be removed from the engine
by an authorized dealer.

7. Put the dipstick back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to

Checking the engine

oil

in this chapter.

2. If the engine oil level is not within the normal range, add only certified
engine oil of the recommended viscosity. Remove the engine oil filler cap
and use a funnel to pour the engine oil into the opening.

3. Recheck the engine oil level. Make sure the oil level is not above the
normal operating range on the engine oil level dipstick.

4. Install the dipstick and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise
1/4 of a turn until three clicks are heard or until the cap is fully seated.

To avoid possible oil loss, DO NOT operate the vehicle with the
engine oil level dipstick and/or the engine oil filler cap removed.

Maintenance and Specifications

216

2010 Transit Connect

(tst)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

Summary of Contents for 2010 Transit Connect




































































































































































































































































Reviews:

No comments

Related manuals for 2010 Transit Connect

PAC RadioPRO 5 RP5-GM41 Quick Start Manual preview
RadioPRO 5 RP5-GM41
Brand: PAC Pages: 3
TUFLOC Dodge Charger TufBox Installation Instructions Manual preview
Dodge Charger TufBox
Brand: TUFLOC Pages: 6
Hama 00178266 Operating Instruction preview
00178266
Brand: Hama Pages: 75
Yakima Prorack K436 Fitting Instructions Manual preview
Prorack K436
Brand: Yakima Pages: 13
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
TAUBENREUTHER 16-5911 Manual preview
16-5911
Brand: TAUBENREUTHER Pages: 18
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Brand: Rugged Ridge Pages: 5
Rigid Hitch BULL BAR Installation Instructions preview
BULL BAR
Brand: Rigid Hitch Pages: 2
Honda 2000 Accord Sedan Online Reference Owner'S Manual preview
2000 Accord Sedan
Brand: Honda Pages: 320
Volkswagen 1963 1500 Instruction Manual preview
1963 1500
Brand: Volkswagen Pages: 68
Menabo ANTARES KIT+1 Assembly & Instruction Manual preview
ANTARES KIT+1
Brand: Menabo Pages: 8
Seat Arona 2018 Owner'S Manual preview
Arona 2018
Brand: Seat Pages: 372
Federal Signal Corporation HighLighter Installation And Programming preview
HighLighter
Brand: Federal Signal Corporation Pages: 20
Ultraplast MD19 User Manual preview
MD19
Brand: Ultraplast Pages: 5
Phonocar 6/946 Instruction Manual preview
6/946
Brand: Phonocar Pages: 4
Fortin Electronic Systems EVO-CAN Suggested Wiring Configuration preview
EVO-CAN
Brand: Fortin Electronic Systems Pages: 5
Volkswagen 2013 GTI Brochure & Specs preview
2013 GTI
Brand: Volkswagen Pages: 11
Cadillac 1967 Calais Coupe Data Book preview
1967 Calais Coupe
Brand: Cadillac Pages: 255

Brands by name

Popular brands

Load more brands