manualshive.com logo in svg

Ford 2010 Transit Connect, Owner'S Manual

The Ford 2010 Transit Connect is a versatile and reliable commercial vehicle designed to meet the needs of entrepreneurs and small business owners. With its spacious interior and efficient engine, this vehicle is ideal for cargo transportation. Ensure you fully understand its features and maintenance requirements by downloading the free Owner's Manual from manualshive.com.

Share
Download
background image

Have a flat serviced by an authorized dealer in order to prevent damage
to the TPMS sensors, refer to

Tire pressure monitoring system

(TPMS)

in the

Tires, Wheels and Loading

chapter. Replace the spare

tire with a road tire as soon as possible. During repairing or replacing of
the flat tire, have the authorized dealer inspect the TPMS sensor for
damage.

WARNING:

The use of tire sealants may damage your Tire

Pressure Monitoring System and should not be used.

WARNING:

Refer to

Tire pressure monitoring system (TPMS)

in the

Tires, Wheels and Loading

chapter for important

information. If the tire pressure monitor sensor becomes damaged, it
will no longer function.

Dissimilar spare tire/wheel information

WARNING:

Failure to follow these guidelines could result in an

increased risk of loss of vehicle control, injury or death.

If you have a dissimilar spare tire/wheel, then it is intended for
temporary use only. This means that if you need to use it, you should
replace it as soon as possible with a road tire/wheel that is the same size
and type as the road tires and wheels that were originally provided by
Ford. If the dissimilar spare tire or wheel is damaged, it should be
replaced rather than repaired.

A dissimilar spare tire/wheel is defined as a spare tire and/or wheel that
is different in brand, size or appearance from the road tires and wheels
and can be one of three types:

1.

T-type mini-spare:

This spare tire begins with the letter “T” for tire

size and may have “Temporary Use Only” molded in the sidewall

2.

Full-size dissimilar spare with label on wheel:

This spare tire has

a label on the wheel that states: “THIS TIRE AND WHEEL FOR
TEMPORARY USE ONLY”

When driving with one of the dissimilar spare tires listed above,

do not:

•

Exceed 50 mph (80 km/h)

•

Load the vehicle beyond maximum vehicle load rating listed on the
Safety Compliance Label

•

Tow a trailer

Roadside Emergencies

182

2010 Transit Connect

(tst)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

Summary of Contents for 2010 Transit Connect




































































































































































































































































Reviews:

No comments

Related manuals for 2010 Transit Connect

cam 2850 Mounting Instructions preview
2850
Brand: cam Pages: 2
Dapper Lighting 575 Install Manual preview
575
Brand: Dapper Lighting Pages: 2
Jeep Automobile Service And Warranty Handbook preview
Automobile
Brand: Jeep Pages: 42
Jeep Automobile Warranty Information Booklet preview
Automobile
Brand: Jeep Pages: 44
Cadillac ATS 2015 Convenience/Personalization Manual preview
ATS 2015
Brand: Cadillac Pages: 20
Jeep Automobile Service Contract preview
Automobile
Brand: Jeep Pages: 7
Cadillac 2016 ELR Convenience/Personalization Manual preview
2016 ELR
Brand: Cadillac Pages: 20
Cadillac 2016 CTS Manual preview
2016 CTS
Brand: Cadillac Pages: 354
Cadillac 2005 CTS Personalization Manual preview
2005 CTS
Brand: Cadillac Pages: 20
Cadillac 2014 XTS Convenience/Personalization Manual preview
2014 XTS
Brand: Cadillac Pages: 20
Cadillac ATS 2014 Specifications preview
ATS 2014
Brand: Cadillac Pages: 10
Cadillac 2013 Escalade ESV Owner'S Manual preview
2013 Escalade ESV
Brand: Cadillac Pages: 524
Cadillac 2013 ATS Personalization Manual preview
2013 ATS
Brand: Cadillac Pages: 20
Cadillac ATS 2013 Owenrs Manual preview
ATS 2013
Brand: Cadillac Pages: 438
Cadillac 2013 ATS Owner'S Manual preview
2013 ATS
Brand: Cadillac Pages: 450
Cadillac 2011 Escalade Hybrid Owner'S Manual Addendum preview
2011 Escalade Hybrid
Brand: Cadillac Pages: 94
Cadillac 2011 Escalade Hybrid Owner'S Manual preview
2011 Escalade Hybrid
Brand: Cadillac Pages: 94
Cadillac 2011 CTS COUPE Navigation Manual preview
2011 CTS COUPE
Brand: Cadillac Pages: 78

Brands by name

Popular brands

Load more brands