manualshive.com logo in svg

Ford 2010 Transit Connect, Owner'S Manual

The Ford 2010 Transit Connect is a versatile and reliable commercial vehicle designed to meet the needs of entrepreneurs and small business owners. With its spacious interior and efficient engine, this vehicle is ideal for cargo transportation. Ensure you fully understand its features and maintenance requirements by downloading the free Owner's Manual from manualshive.com.

Share
Download
background image

8. Remove the valve cap from the valve stem on the right rear tire.
Decrease the air pressure until the horn sounds.

9. Remove the valve cap from the valve stem on the left rear tire.
Decrease the air pressure until the horn sounds.

Training is complete after the horn sounds for the last tire trained
(driver’s side rear tire) and the TPMS indicator

stops flashing.

10. Turn the ignition off. If two short horn beeps are heard, the reset
procedure was unsuccessful and must be repeated.

If after repeating the procedure and two short beeps are heard when the
ignition is turned to off, seek assistance from your authorized dealer.

11. Set all four tires to the recommended air pressure as indicated on
the Safety Compliance Certification Label or Tire Label located on the
B-Pillar or the edge of the driver’s door. See

Vehicle Loading

in this

chapter for more information.

SNOW TIRES AND CHAINS

WARNING:

Snow tires must be the same size, load index, speed

rating as those originally provided by Ford. Use of any tire or

wheel not recommended by Ford can affect the safety and
performance of your vehicle, which could result in an increased risk of
loss of vehicle control, vehicle rollover, personal injury and death.
Additionally, the use of non-recommended tires and wheels could
cause steering, suspension, axle or transfer case/power transfer unit
failure.

The original equipment tires on your vehicle have an all-weather tread
design to provide traction, handling and braking performance in
year-round driving. You may install snow tires for improved traction
when driving in areas with sustained periods of snow or icy driving
conditions.

If you choose to install snow tires on your vehicle, they must be the
same size, construction, and load range as the original tires listed on the
tire placard, and they must be installed on all four wheels. Mixing tires of
different size or construction on your vehicle can adversely affect your
vehicle’s handling and braking, and may lead to loss of vehicle control.

WARNING:

Do not use snow chains or cables on this vehicle as

they may cause damage to your vehicle which may lead to loss

of vehicle control.

Tires, Wheels and Loading

145

2010 Transit Connect

(tst)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

Summary of Contents for 2010 Transit Connect




































































































































































































































































Reviews:

No comments

Related manuals for 2010 Transit Connect

Jabra TOUR Get Started preview
TOUR
Brand: Jabra Pages: 10
GOgroove SMARTmini AUX Operating Manual preview
SMARTmini AUX
Brand: GOgroove Pages: 9
Vauxhall INSIGNIA 2017 Owner'S Manual preview
INSIGNIA 2017
Brand: Vauxhall Pages: 323
Subaru SPLASH GUARD Installation Manual preview
SPLASH GUARD
Brand: Subaru Pages: 3
Kia 2016 Cadenza Owner'S Manual preview
2016 Cadenza
Brand: Kia Pages: 419
REVCAMUK MON16AHD Instructions preview
MON16AHD
Brand: REVCAMUK Pages: 4
MAXWORKS 70275 Instruction Manual & Parts Catalogue preview
70275
Brand: MAXWORKS Pages: 7
Ecco Vantage 12 Series Installation And Operation Instructions preview
Vantage 12 Series
Brand: Ecco Pages: 5
VDO VIEWLINE 52 MM - MOUNTING 11-09 Installation Instructions preview
VIEWLINE 52 MM - MOUNTING 11-09
Brand: VDO Pages: 4
Whelen Engineering Company FastTrax FTF4 Installation Manual preview
FastTrax FTF4
Brand: Whelen Engineering Company Pages: 9
Brodit ProClip 854208 Manual preview
ProClip 854208
Brand: Brodit Pages: 2
v.link VL2-MBN2 Manual preview
VL2-MBN2
Brand: v.link Pages: 12
WATT CARWATT CV12-220C150 User Manual preview
CARWATT CV12-220C150
Brand: WATT Pages: 26
Cadillac XLR-V Specifications preview
XLR-V
Brand: Cadillac Pages: 2
Buick Cascada 2016 Getting To Know Manual preview
Cascada 2016
Brand: Buick Pages: 20
Westin 32-2250 Instructions preview
32-2250
Brand: Westin Pages: 3
Blue Bird TC/2000 Owner'S Manual preview
TC/2000
Brand: Blue Bird Pages: 111
Pet Gear PG9050TN Instruction Manual preview
PG9050TN
Brand: Pet Gear Pages: 4

Brands by name

Popular brands

Load more brands