manualshive.com logo in svg

Ford 2010 Transit Connect, Owner'S Manual

The Ford 2010 Transit Connect is a versatile and reliable commercial vehicle designed to meet the needs of entrepreneurs and small business owners. With its spacious interior and efficient engine, this vehicle is ideal for cargo transportation. Ensure you fully understand its features and maintenance requirements by downloading the free Owner's Manual from manualshive.com.

Share
Download
background image

The process for programming Securilock™ keys is independent of the
process for programming Remote Entry Transmitters. If your vehicle is
fitted with Securilock™ and Remote Entry, you must perform both
learning procedures in order to program both the Immobilizer and
Remote Locking functions of the key fob.

Tips:

•

A maximum of eight keys can be coded to your vehicle.

•

Only use SecuriLock™ keys.

•

You must have two previously programmed coded keys (keys that
already operate your vehicle’s engine) and the new unprogrammed
key(s) readily accessible.

•

If two previously programmed coded keys are not available, you must
take your vehicle to your authorized dealer to have the spare key(s)
programmed.

1. Insert a previously programmed
coded key into the ignition.

2. Turn the ignition from the O (off)
position to the II (on) position.
Keep the ignition in the II (on)
position for at least one second, but
no more than 10 seconds.

3. Turn the ignition to the O (off)
position.

4. Remove the previously programmed coded key from the ignition.

5. After three seconds but within 10 seconds of removing the previously
programmed coded key, insert the other previously programmed coded
key into the ignition.

6. Turn the ignition from the O (off) position to the II (on) position.
Keep the ignition in the II (on) position for at least one second but not
more than 10 seconds.

7. Turn the ignition to the O (off) position.

8. Remove the previously programmed coded key from the ignition.

9. After three seconds but within twenty seconds of removing the
previously programmed coded key, insert the unprogrammed key
(new/valet key) into the ignition.

10. Turn the ignition from the O (off) position to the II (on) position.
Keep the ignition in the II (on) position for at least one second, but no
more than 10 seconds.

Locks and Security

68

2010 Transit Connect

(tst)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

Summary of Contents for 2010 Transit Connect




































































































































































































































































Reviews:

No comments

Related manuals for 2010 Transit Connect

Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
Federal Signal Corporation Vision SLR Quick Disconnect Manual preview
Vision SLR
Brand: Federal Signal Corporation Pages: 8
Federal Signal Corporation Vision SLR Supplement Manual preview
Vision SLR
Brand: Federal Signal Corporation Pages: 8
Vauxhall Meriva Quick Reference Manual preview
Meriva
Brand: Vauxhall Pages: 2
Vauxhall Ampera Quick Reference Manual preview
Ampera
Brand: Vauxhall Pages: 2
Vauxhall 2012 Agila Quick Reference Manual preview
2012 Agila
Brand: Vauxhall Pages: 2
Vauxhall 2013 Mokka Owner'S Manual preview
2013 Mokka
Brand: Vauxhall Pages: 209
VBC Racing WildFire Instruction Manual preview
WildFire
Brand: VBC Racing Pages: 34
Vauxhall 2013 Corsa Infotainment system Quick Reference Manual preview
2013 Corsa Infotainment system
Brand: Vauxhall Pages: 2
Vauxhall 2010 Astra Quick Reference Manual preview
2010 Astra
Brand: Vauxhall Pages: 2
Vauxhall Antara Owner'S Manual preview
Antara
Brand: Vauxhall Pages: 236
Yakima Q46 Installation Instructions preview
Q46
Brand: Yakima Pages: 4
Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
Kia Sportage 2018 Features & Functions Manual preview
Sportage 2018
Brand: Kia Pages: 54
AutoWatch 457 Rli Wiring Diagram preview
457 Rli
Brand: AutoWatch Pages: 4
Dometic Heki 2 Installation And Operating Manual preview
Heki 2
Brand: Dometic Pages: 158
KRAFTWERK Automotive 31006 Instructions preview
Automotive 31006
Brand: KRAFTWERK Pages: 2
Nav TV NAV-INREN Quick Manual preview
NAV-INREN
Brand: Nav TV Pages: 2

Brands by name

Popular brands

Load more brands