manualshive.com logo in svg

Ford 2010 Transit Connect, Owner'S Manual

The Ford 2010 Transit Connect is a versatile and reliable commercial vehicle designed to meet the needs of entrepreneurs and small business owners. With its spacious interior and efficient engine, this vehicle is ideal for cargo transportation. Ensure you fully understand its features and maintenance requirements by downloading the free Owner's Manual from manualshive.com.

Share
Download
background image

WARNING:

All occupants of the vehicle, including the driver,

should always properly wear their safety belts, even when an air

bag supplemental restraint system (SRS) is provided.

WARNING:

Always transport children 12 years old and under in

a rear seating position, and always properly use appropriate child

restraints. Never place a rear-facing child seat in front of an active
airbag. If you must transport a forward-facing child in the front seat,
move the seat all the way back and use appropriate restraints.

WARNING:

National Highway Traffic Safety Administration

(NHTSA) recommends a minimum distance of at least 10 inches

(25 cm) between an occupant’s chest and the driver airbag module.

WARNING:

Never place your arm over the air bag module as a

deploying air bag can result in serious arm fractures or other

injuries.

To properly position yourself away from the airbag:

•

Move your seat to the rear as far as you can while still reaching the
pedals comfortably.

•

Recline the seat slightly one or two degrees from the upright position.

WARNING:

Do not put anything on or over the air bag module.

Placing objects on or over the air bag inflation area may cause

those objects to be propelled by the air bag into your face and torso
causing serious injury.

WARNING:

Do not attempt to service, repair, or modify the

airbag supplemental restraint systems or its fuses. Contact your

authorized dealer as soon as possible.

WARNING:

Modifying or adding equipment to the front end of

the vehicle (including frame, bumper, front end body structure

and tow hooks) may affect the performance of the airbag system,
increasing the risk of injury. Do not modify the front end of the
vehicle.

Seating and Safety Restraints

93

2010 Transit Connect

(tst)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

Summary of Contents for 2010 Transit Connect




































































































































































































































































Reviews:

No comments

Related manuals for 2010 Transit Connect

Prorack K748 Fitting Instructions Manual preview
K748
Brand: Prorack Pages: 14
MAXWORKS 70275 Instruction Manual & Parts Catalogue preview
70275
Brand: MAXWORKS Pages: 7
Gatorback Mudflaps GCR53F Mounting Diagram & Instructions preview
GCR53F
Brand: Gatorback Mudflaps Pages: 4
Dodge 2010 Challenger SRT Owner'S Manual preview
2010 Challenger SRT
Brand: Dodge Pages: 444
Jeep Grand Cherokee SRT 2019 Owner'S Manual preview
Grand Cherokee SRT 2019
Brand: Jeep Pages: 656
GROM Audio VLINE Installation Manual preview
VLINE
Brand: GROM Audio Pages: 20
Westin 33-1920 Instructions preview
33-1920
Brand: Westin Pages: 3
LaserLine 921K Operating Instructions preview
921K
Brand: LaserLine Pages: 4
Haltech PLATINUM HT051202 Quick Start Manual preview
PLATINUM HT051202
Brand: Haltech Pages: 10
Waeco MagicWatch MWE850 Installation And Operating Manual preview
MagicWatch MWE850
Brand: Waeco Pages: 200
TOP VEHICLE TECH GRKRT01 Installation Manual preview
GRKRT01
Brand: TOP VEHICLE TECH Pages: 8
Malone Stax Pro2 Installation & Loading Instructions preview
Stax Pro2
Brand: Malone Pages: 16
Mitsubishi 1989 Galant Service Manual preview
1989 Galant
Brand: Mitsubishi Pages: 1273
Ford 2016 EXPLORER Owner'S Manual preview
2016 EXPLORER
Brand: Ford Pages: 541
Myenergi zappi User Manual preview
zappi
Brand: Myenergi Pages: 42
Metra Electronics 95-8211 Installation Instructions Manual preview
95-8211
Brand: Metra Electronics Pages: 8
Autostart XL-202 Quick Start User Manual preview
XL-202
Brand: Autostart Pages: 1
Toyota PZ403-9963F-00 Fitting Instructions Manual preview
PZ403-9963F-00
Brand: Toyota Pages: 6

Brands by name

Popular brands

Load more brands