manualshive.com logo in svg

Ford 2010 Transit Connect, Owner'S Manual

The Ford 2010 Transit Connect is a versatile and reliable commercial vehicle designed to meet the needs of entrepreneurs and small business owners. With its spacious interior and efficient engine, this vehicle is ideal for cargo transportation. Ensure you fully understand its features and maintenance requirements by downloading the free Owner's Manual from manualshive.com.

Share
Download
background image

Do not add friction modifier compounds or special break-in oils since
these additives may prevent piston ring seating. See

Engine oil

in the

Maintenance and Specifications

chapter for more information on oil

usage.

SPECIAL NOTICES

New Vehicle Limited Warranty

For a detailed description of what is covered and what is not covered by
your vehicle’s New Vehicle Limited Warranty, refer to the

Warranty

Guide/Customer Information Guide

that is provided to you along with

your

Owner’s Guide.

Special instructions

For your added safety, your vehicle is fitted with sophisticated electronic
controls.

WARNING:

Please read the section

Airbag Supplemental

Restraint System (SRS)

in the

Seating and Safety Restraints

chapter. Failure to follow the specific warnings and instructions could
result in personal injury.

WARNING:

Front seat mounted rear-facing child or infant seats

should

NEVER

be placed in front of an active passenger airbag.

Notice to owners of pickup trucks and utility type vehicles

WARNING:

Utility vehicles have a significantly higher rollover

rate than other types of vehicles.

Before you drive your vehicle, please read this

Owner’s Guide

carefully.

Your vehicle is not a passenger car. As with other vehicles of this type,
failure to operate this vehicle correctly may result in loss of vehicle
control, vehicle rollover, personal injury or death.

Using your vehicle as an ambulance

Do not use this vehicle as an ambulance.

Your vehicle is not equipped with the Ford Ambulance Preparation
Package.

Introduction

6

2010 Transit Connect

(tst)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

Summary of Contents for 2010 Transit Connect




































































































































































































































































Reviews:

No comments

Related manuals for 2010 Transit Connect

HALE MM-03 Driver Manual preview
MM-03
Brand: HALE Pages: 44
Jeep 2009 Wrangler Quick Reference Manual preview
2009 Wrangler
Brand: Jeep Pages: 12
Jeep 2008 Liberty Installation Instructions Manual preview
2008 Liberty
Brand: Jeep Pages: 6
Warrior Products 4560 Manual preview
4560
Brand: Warrior Products Pages: 4
Jeep PATRIOT 2013 Manual preview
PATRIOT 2013
Brand: Jeep Pages: 16
Audi RSE III Quick Start Manual preview
RSE III
Brand: Audi Pages: 4
Skoda OCTAVIA - TECHNICAL CHANGES 11-2009 Owner'S Manual Supplement preview
OCTAVIA - TECHNICAL CHANGES 11-2009
Brand: Skoda Pages: 16
Prorack WHISPBAR S53 Fitting Instructions For Basic Carrier preview
WHISPBAR S53
Brand: Prorack Pages: 10
Improved Racing E5G-601 Instructions Manual preview
E5G-601
Brand: Improved Racing Pages: 17
AMP Research BEDXTENDER HD MAX 74841-00A Assembly Installation Manual preview
BEDXTENDER HD MAX 74841-00A
Brand: AMP Research Pages: 9
Belkin F8V7058-APL User Manual preview
F8V7058-APL
Brand: Belkin Pages: 2
Cadillac Escalade 2004 Escalade ESV Owner'S Manual preview
Escalade 2004 Escalade ESV
Brand: Cadillac Pages: 472
Roadefend RDT401P Instruction Book preview
RDT401P
Brand: Roadefend Pages: 15
Audiovox Electronics HR7012M Installation Manual preview
HR7012M
Brand: Audiovox Electronics Pages: 12
Directed Directechs FORD11 Installation Manual preview
Directechs FORD11
Brand: Directed Pages: 23
Hama 00046080 Instructions For Use preview
00046080
Brand: Hama Pages: 2
Volvo XC40 RECHARGE Retailer Pairing Manual preview
XC40 RECHARGE
Brand: Volvo Pages: 5
Prorack K671 Fitting Instructions Manual preview
K671
Brand: Prorack Pages: 17

Brands by name

Popular brands

Load more brands