manualshive.com logo in svg

Ford 2010 Transit Connect, Owner'S Manual

The Ford 2010 Transit Connect is a versatile and reliable commercial vehicle designed to meet the needs of entrepreneurs and small business owners. With its spacious interior and efficient engine, this vehicle is ideal for cargo transportation. Ensure you fully understand its features and maintenance requirements by downloading the free Owner's Manual from manualshive.com.

Share
Download
background image

MULTI-FUNCTION LEVER

Windshield wiper

Move the lever down for a single
wipe.

For intermittent operation,

move control up one position and
adjust the rotary control to the
desired speed.

For normal operation, move

control up two positions and up
three positions for high speed
wiping.

Windshield washer

To activate the windshield washer, push the windshield washer

control. Release control to stop washer fluid spray. The wipers will
operate for a short time after the wash is turned off.

Note:

Do not operate the washer when the washer reservoir is empty.

This may cause the washer pump to overheat. Check the washer fluid
level frequently. Do not operate the wipers when the windshield is dry.
This may scratch the glass, damage the wiper blades and cause the wiper
motor to burn out. Before operating the wiper on a dry windshield,
always use the windshield washer. In freezing weather, be sure the wiper
blades are not frozen to the windshield before operating the wipers.

Rear window wiper/washer (if equipped)

Wiper

Pull the lever towards you for intermittent wiping.

Washer

Pull the lever further to operate the washer. The wiper will operate

for a short time and will activate once more after pausing to clear the
windshield.

Reverse gear wipe

The rear wiper will be activated automatically when shifting into reverse
if the front wiper is activated.

Driver Controls

50

2010 Transit Connect

(tst)

Owners Guide

(own2002)

, 1st Printing

USA

(fus)

Summary of Contents for 2010 Transit Connect




































































































































































































































































Reviews:

No comments

Related manuals for 2010 Transit Connect

Tamiya KO PROPO RTF 2002 ESC Manual preview
KO PROPO RTF 2002 ESC
Brand: Tamiya Pages: 2
Kuda 079020 Installation Instruction preview
079020
Brand: Kuda Pages: 2
ULTIMATE SPEED 279746 Assembly And Safety Advice preview
279746
Brand: ULTIMATE SPEED Pages: 6
Hudson 1933 Eight Owner'S Manual preview
1933 Eight
Brand: Hudson Pages: 34
RBO RBO4038 Product Manual preview
RBO4038
Brand: RBO Pages: 15
Audi 2011 A3 Sportback Pricing And Specification Manual preview
2011 A3 Sportback
Brand: Audi Pages: 29
Motoalliance Denali MA11705 Manual preview
Denali MA11705
Brand: Motoalliance Pages: 5
Carcomm CHFS-34 HTC Installation Manual preview
CHFS-34 HTC
Brand: Carcomm Pages: 2
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
Anker Technology Roav VIVA Owner'S Manual preview
Roav VIVA
Brand: Anker Technology Pages: 8
Westfalia 859528 Original Instructions Manual preview
859528
Brand: Westfalia Pages: 10
Whispbar K684W Fitting Instructions Manual preview
K684W
Brand: Whispbar Pages: 15
Menabo ANTARES KIT+1 Assembly & Instruction Manual preview
ANTARES KIT+1
Brand: Menabo Pages: 8
Seat Arona 2018 Owner'S Manual preview
Arona 2018
Brand: Seat Pages: 372
AUTOTECH 10.109.418K Installation Instructions preview
10.109.418K
Brand: AUTOTECH Pages: 4
DICE DCR-150 Installation Manual preview
DCR-150
Brand: DICE Pages: 1
Hudson Super-Six 1926 Instruction Book preview
Super-Six 1926
Brand: Hudson Pages: 24
MBW i Wallbox Plus Owner'S Manual preview
i Wallbox Plus
Brand: MBW Pages: 40

Brands by name

Popular brands

Load more brands