Ford 1996 Explorer Page 290 Manual Download | Manualshive

Page: 290 / 444

background image

290

%

*

[DR37800(ALL)07/95]

Safety Chains

[DR37925( X)03/93]

Located near the step bumper hitch ball position are two holes
in the underside of the hitch plate for a Class II trailer (max).
These holes may be used for safety chain attachment when
towing with the step bumper. Always use safety chains when
towing. Safety chains are used to retain connection between the
towing and towed vehicle in the event of separation of the
trailer coupling or ball. Cross the chains under the trailer tongue
and allow slack for turning corners. Connect the chain to the
hitch plate using a positive coupling, such as “Quick Links”,
with a strength rating of at least that of the safety chain rating.

[DR37950( X)12/92]

When using a frame mounted trailer hitch, do not attach the
safety chains to the step bumper. Attach the safety chains to the
frame mounted hitch using the recommendations supplied by
the hitch manufacturer.

%

*

[DR38000(ALL)08/95]

Trailer Brakes

*

[DR38100(ALL)03/95]

Separate trailer brakes are required on most towed vehicles
weighing over 1,500 lb (680 kg).

*

[DR38200(ALL)05/95]

R

WARNING

Do not connect a trailer’s hydraulic brake system directly
to your vehicle’s brake system. Your vehicle may not
have enough braking power and your chances of having
a collision greatly increase.

%

*

[DR38300(ALL)06/95]

Trailer Lamps

*

[DR38400(ALL)11/89]

Make sure your trailer lamps conform to Federal and local
regulations.

*

[DR38425(ALL)03/91]

Class I and Class II Trailer Tow electrical wiring provides two
circuits (right hand and left hand) to operate trailer stop/turn
tail lamps. Each stop/turn circuit will operate one combination
stop/turn light bulb (# 1157, 3157, 2357, or 3357) on the trailer.
Never add more than one trailer light bulb to one circuit.

File:10undrx.ex

Update:Thu Feb 29 09:12:36 1996

«
...
288
289
290
291
292
...
»

Summary of Contents for 1996 Explorer





























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Explorer

Brand: Yakima Pages: 8

SmartShot Automatic 12V 1.5 Amp 5 Stage

Brand: Yuasa Pages: 44

Brand: tams elektronik Pages: 44

Brand: ACV Pages: 2

Brand: JKS Pages: 6

Brand: cam Pages: 28

Brand: Metra Electronics Pages: 20

3 Facelift 2006

Brand: Mazda Pages: 94

Brand: Hama Pages: 13

Brand: EUFAB Pages: 20

Brand: Brainz Pages: 2

Brand: Reese Pages: 21

Brand: QA1 Pages: 4

Brand: SAAS Pages: 3

Brand: Nuna Pages: 29

Brand: APS Pages: 4

Brand: Mercedes-Benz Pages: 284

Brand: Tuff Tonneaus Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands