manualshive.com logo in svg

Ford 1996 Explorer, Manual

Get your hands on the manual for the Ford 1996 Explorer for free download! Find all the information you need to maintain and operate your vehicle. Access the manual from manualshive.com and have all the guidance you need at your fingertips. Don't miss out on this valuable resource.

Share
Download
background image

304

[RE14815( X)09/95]

Explorer Limited 4x2/4x4

*

[RE15100(ALL)05/95]

R

WARNING

Make sure the spare tire and jacking equipment are
stowed and secured in the proper storage location.

%

*

[RE15200(ALL)03/95]

Preparing to Change the Tire

*

[RE15250(ALL)12/91]

NOTE: To lift your vehicle by other than the front or rear

jacking points, be sure to use only hoist adapters with
a wide contact surface.

*

[RE15300(ALL)03/91]

1.

Make sure that your vehicle will not move or roll. If you
have an automatic transmission, put the gearshift in Park. If
you have a manual transmission, put the gearshift in
Reverse. Set the parking brake and block the wheel that is
diagonally opposite the tire that you are changing.

*

[RE15335(ALL)12/91]

NOTE: Make sure the ignition is in the OFF position.

*

[RE15390(ALL)05/95]

When one of the back wheels is off the ground, the transmission
alone will not prevent the vehicle from moving or slipping off
the jack, even if the vehicle is in P (Park) or 1 (First). To
prevent the vehicle from moving when you change a tire, be
sure the parking brake is set, then block the wheel (both
directions) that is diagonally opposite (other side and end of the
vehicle) to the tire that is being changed.

[RE15400(ALL)05/95]

R

WARNING

If the vehicle slips off the jack, someone could be
seriously injured.

*

[RE15550(ALL)03/95]

2.

Get out the spare tire and jack.

[RE16050( X)01/95]

The jack is stowed behind the driver’s side, rear quarter trim
panel. Remove the quarter trim panel cover to get to it. The lug
nut wrench is attached to the inside of the quarter trim panel
cover. Stowed along with the jack is a jacking/tire changing

File:12unrex.ex

Update:Thu Feb 29 09:14:34 1996

Summary of Contents for 1996 Explorer





























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 1996 Explorer

Qube AP1 Supplemental Instructions preview
AP1
Brand: Qube Pages: 19
Cadillac 2000 Warranty And Owner Assistance Information preview
2000
Brand: Cadillac Pages: 32
Jabra FREEWAY Datasheet preview
FREEWAY
Brand: Jabra Pages: 2
Jabra BT330 User Manual preview
BT330
Brand: Jabra Pages: 38
GARO ENTITY PRO Installation preview
ENTITY PRO
Brand: GARO Pages: 2
Brodit ProClip 853660 Manual preview
ProClip 853660
Brand: Brodit Pages: 2
Power Fist 8985988 Manual preview
8985988
Brand: Power Fist Pages: 12
EAL EUFAB 16491 Operating Instructions Manual preview
EUFAB 16491
Brand: EAL Pages: 7
Thule 1511 Instructions Manual preview
1511
Brand: Thule Pages: 8
Thule 1308 Instructions Manual preview
1308
Brand: Thule Pages: 8
Chevrolet LUMINA 1997 Owner'S Manual preview
LUMINA 1997
Brand: Chevrolet Pages: 376
Mazda 2008 CX-9 Brochure & Specs preview
2008 CX-9
Brand: Mazda Pages: 15
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
Omix-Ada Alloy Rugged Ridge X-Clamp Manual preview
Alloy Rugged Ridge X-Clamp
Brand: Omix-Ada Pages: 2
Dodge 8W-70 Wiring Diagram preview
8W-70
Brand: Dodge Pages: 3
RAM Truck 2014 Owner'S Manual preview
Truck 2014
Brand: RAM Pages: 330
Jeep WRANGLER 2017 User Manual preview
WRANGLER 2017
Brand: Jeep Pages: 292
Speedtech 64-67 Instructional Manual preview
64-67
Brand: Speedtech Pages: 12

Brands by name

Popular brands

Load more brands