Ford 1996 Explorer, Manual, Page: 210 / 444

210
%
*
[AS01500( X)08/95]
How to tune radio stations
*
[AS01600( X)01/95]
There are four ways for you to tune in a particular station. You
can use the “TUNE”, “SEEK”, “SCAN” or memory buttons.
*
[AS01700( X)09/95]
■
Using the “TUNE” function
*
[AS01800( X)01/95]
You can change the frequency up or down one increment at
a time by pressing and releasing either the left (
b
) or right
( a ) side of the “TUNE” or “TUNE DISCS” button. To
change frequencies quickly, press and hold down either the
right or left side of the button.
*
[AS01900( X)08/95]
Manual tuning adjusts your radio to any allowable broadcast
frequency, whether or not a station is present on that
frequency. (See All About Radio Frequencies in this section.)
*
[AS02000( X)08/95]
■
Using the “SEEK” function
*
[AS02100( X)05/95]
Press the right (
a
) side of the “SEEK” button to select the
next listenable station up the frequency band. Press the left
(
b
) side of the button to select the next listenable station
down the frequency band. By holding the button down,
listenable stations can be passed over to reach the desired
station.
*
[AS02200( X)01/95]
■
Using the “SCAN” function
*
[AS02300( X)04/95]
Pressing the “SCAN” button will begin the scan mode up
the frequency band, stopping on each listenable station for
approximately five seconds.
*
[AS02400( X)02/95]
To stop the scan mode on the presently sampled station,
press the “SCAN” button again.
*
[AS02500( X)01/95]
■
Setting the station MEMORY PRESET buttons
*
[AS02600( X)01/95]
Your radio is equipped with 6 station memory buttons.
These buttons can be used to select up to 6 preset AM
stations and 12 FM stations (6 in FM1 and 6 in FM2)
File:09unasx.ex
Update:Thu Feb 29 09:08:53 1996