Ford 1996 Explorer Manual Download Page 12 | Manualshive

Page: 12 / 444

Ford 1996 Explorer Manual Download Page 12

10

*

[SR02550(ALL)05/95]

R

WARNING

Ford recommends that all safety belt assemblies and
attaching hardware should be inspected by a qualified
technician after any collision. Safety belt assemblies not
in use during a collision should also be inspected and
replaced if either damage or improper operation is noted.

*

[SR02600(ALL)08/95]

R

WARNING

To reduce the risk of serious injury in a collision,
children should always ride with the seatback upright.

*

[SR02800(ALL)06/95]

R

WARNING

Never wear the shoulder belt under the arm. Never
swing it around the neck over the inside shoulder. Never
use a single belt for more than one person or across more
than one seating position. Each seating position in your
vehicle has a specific safety belt assembly which is made
up of one buckle and one tongue that are designed to be
used as a pair. Failure to follow these precautions could
increase the risk and/or severity of injury in a collision.

*

[SR02900(ALL)09/95]

R

WARNING

Lock the doors of your vehicle before driving to lessen
the risk of the door coming open in a collision.

File:03unsrx.ex

Update:Thu Feb 29 09:02:31 1996

«
...
10
11
12
13
14
...
»

Summary of Contents for 1996 Explorer





























































































































































































































































































































































































































































Reviews:

No comments