Ford 1996 Explorer, Manual, Page: 23 / 444

Safety Restraints
21
[SR07900(ALL)10/90]
Rear Lap Belt with Retractor
[SR08000(ALL)12/89]
Pull the belt out of the retractor with a steady motion and insert
the tongue into the proper buckle until you hear a snap and
feel the latch engage.
[SR08100( X)04/94]
10-1/2 pica
art:0020640-D
Fastening and unfastening the rear center safety belts (4-door model)
*
[SR08500(ALL)05/95]
To Unfasten the Safety Belts with Retractors:
*
[SR08600(ALL)08/95]
1.
Push the release button on the buckle. This allows the
tongue to unlatch from the buckle.
*
[SR08700(ALL)03/95] 2.
While the belt retracts, guide the tongue to its stowed
position. If you do not guide the tongue, it may strike you
or part of the vehicle.
%
*
[SR09600(ALL)08/95]
Safety Belt Extension Assembly
*
[SR09700(ALL)07/95]
For some people, the safety belt may be too short even when it
is fully extended. You can add about eight inches (20 cm) to the
belt length with a safety belt extension assembly (part number
611C22). Safety belt extensions are available at no cost from
your dealer.
File:03unsrx.ex
Update:Thu Feb 29 09:02:31 1996