Home
/
Ford
/
1996 Explorer
/
Manual

Ford 1996 Explorer, Manual

Share

Page: 15 / 444

Ford 1996 Explorer Manual Download Page 15

Safety Restraints

13

%

*

[SR03521(ALL)08/95]

Automatic locking mode

*

[SR03522(ALL)08/95]

In this operating mode, the shoulder belt retractor will be
automatically locked and will remain locked when the
combination lap/shoulder safety belt is buckled, and does not
allow the occupant freedom of movement. This mode provides
the following:

*

[SR03523(ALL)08/95]

■

A tight lap/shoulder belt on the occupant.

*

[SR03524(ALL)08/95]

■

Child safety seat installation.

*

[SR03526( X)08/95]

R

WARNING

Rear-facing infant seats should never be placed in the
front seats.

[SR03527( X)09/95]

R

WARNING

This mode must be used when installing a child safety
seat on the front passenger seat and rear outboard seats
where dual locking retractors are provided.

*

[SR03529(ALL)08/95]

To switch the retractor from the emergency locking mode to the
automatic locking mode, perform the following steps:

*

[SR03530(ALL)08/95]

1.

Buckle the lap/shoulder combination belt.

*

[SR03531(ALL)09/95]

2.

Grasp the shoulder portion of the belt and pull downward
until all of the belt is extracted and, when allowed to retract,
a clicking sound is heard. At this time, the belt retractor is in
the automatic locking mode (child restraint mode).

*

[SR03532(ALL)08/95]

3.

A clicking sound will continue to be heard as the belt is
allowed to retract. This indicates that the retractor is in the
automatic locking mode.

File:03unsrx.ex

Update:Thu Feb 29 09:02:31 1996

«
...
13
14
15
16
17
...
»

Summary of Contents for 1996 Explorer





























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands