Operation Manual EMGZ 309.EIP
20.12.2018
24
B) The amplifier output can be displayed in 0…10VDC, 0…20mA or 4…20mA
7.3
Displaying of Overload, Over and Underflow
In the Operation State the EMGZ309 amplifier will indicate limit violations on the
display depending on the chosen unit:
256)
If a tension has been chosen, the reading on the
display at overload will be:
B) If the display was set to show the amplifier output, following messages will be
displayed:
At
overflow: or
At
underflow:
or
Note
An overflow messages is caused by the maximum output value 10V or 20mA being
overshot. An underflow message is caused by the minimum value 0V or 4mA being
undershot. The parameter [F@OutMax] can influence the overflow messages. If the
actual tension value overflows the value entered in [F@OutMax], an error message
will be displayed.
Overload
1200.0 N
Out>Max
20.00 mA
Out<Min
0.00
Out>Max
Out<Min
0.00 V
