Operation Manual EMGZ 309.EIP
20.12.2018
18
6.2
IP Configuration
In an industrial environment the IP addresses are normally assigned fix to the EIP
devices. This holds also for the EMGZ309._.EIP amplifier that needs a fix IP
address in the network. The IP address configuration must take place before the
amplifier is integrated in a network. This is done over the operation panel or over
the web interface.
The procedures are described in the state diagrams chapter 8 (Fig. 18; 19) and
chapter 9 (Fig.31)
6.3
Integration in a Project
Before starting the development system RSLogix5000 the PLC and amplifier need
to be connected to the network and powered-up. Now a new project or an existing
project can be opened in RSLogix5000. Search in the tree structure
Controller
Organizer
for the listing Ethernet and make a right mouse click (see Fig. 10).
