Website
34
Function Settings:
Function Settings:
Function Settings:
1. Enter
End point
menu
.
2. Tap the item you want to set, then click + / - to change the
value. Tap to return.
1. Enter Subtrim menu.
2. Click the channel you want to set.
3. Click + / - to change the neutral value. Tap to return.
This function is used to adjust the center point of each channel.
Due to the structure of some models the servos center point may need to be adjusted so that when at rest all the
control surfaces line up properly.
When using this function make sure that the stick, knob etc. is at its center position.
7.8 Subtrim
7.9 Conditions
To display the neutral point.
Conditions is divided into move mode and work mode. The two modes can be done with different settings to
achieve the same operation in different modes corresponding to different effects. When the same stick is used to
control the mobile mode or arm, this function can be used to assign the control mode in two working modes for
achieving the menu switch. The title shows the current conditions state. You can set the function parameters to
save the current conditions.
1. Click the working mode.
2. Enable this function, and toggle the corresponding button
or switch. Click to save setting.
3. Toggle the switch to change the work mode.
