Website
16
7. Function Settings
This chapter introduces the main system functions.
7.1 Disp servos
To display the real-time output value of each individual channel, and activate the mode of testing all 18 channels.
Display Servos
Function Settings:
Channel Test
When automatic detection of servos is enabled, servos
of all channel will oscillate slowly and repeatedly. Be
cautious.
Function Settings:
1. Tap
Disp servos
to enter the display servos menu
.
2. Toggle the control corresponding to the channel.
3. To view the real-time output value via this function.
Tap to return.
1. Tap
to activate channel test mode. A prompt
window appears, then click
Yes
to start. When test
mode is active, all channels will slowly move through
their entire range of motion.
2. Tap this icon again to exit test mode.
DANGER
• To avoid accidents，do not activate this function when the transmitter is
connected with the models or the engines of the model is started.
7.2 Function Assignment
This function allows you to reassign the functions, controls and trims of the 18 channels according to the current
model structure or operation habits.
If the small triangle at the bottom right of the function
box is cyan, the setting is for all conditions. If it is
orange, the setting is for the current condition.
