Website
18
position is in the low position and 100% when the control
position is in the high position (the neutral position control
ratio in the three-level switch is 0%).
It is conversely for
Reverse
. In other words, the control
ratio of SW switches is 100% in the low position and -100% in
the high position.
•
For logic switches, you cannot set the parameters.
When the logic switch is ON, it means the control ratio is
100% .
OFF
means the control ratio is -100%.
Function Settings:
1. Tap
the control, such as
VRA
, then click
Normal
or
Reverse
.
2. Tap
High
, then tap to enter the next menu. After
selecting
Down side
or
Up side
, the selected item turns to
light green.
3. Click + or - to change the
Up-side
and
Down-side
values to
the desired point. Tap to return.
Assigning Function Trims
To assign a trim button for a function selected.
Function Settings:
Enter
Trim
menu, then tap the trim button on the menu to finish.
Note: For TR kind switches, you can select it by toggling the
corresponding physical button on the transmitter.
7.3 Model Setting
This function allow you to operate related settings of models, including model name, switch model, model
structure, model combination, custom main-menu, restore the current model, copy model, and import or export
model.
7.3.1 Model Name
To name the model.
Function Settings:
1. Tap
Model name
, a soft keyboard comes along with it
.
2. Input a new name for it using the soft keyboard. Tap
to return. The length of the model name is limited by the
display range of the top status bar.
