Website
44
Used to set and display some parameters and information related to RF, such as RF type, RF module firmware update, RF module version
information related content.
7.21 RF Setup
Select this option to enable the RF function. By default, it
is enabled.
To set the RF function is enabled or disabled.
To set the safe status for SW class switches. After setting,
when the transmitter powers on, the system will check
whether the switch is on the safe position. If the switch is
not at the safe position, a alarm will acitivate.
7.21.1 Transmit
7.21.2 RF Set to Be On By Default
7.21.3 RF Alarm Settings
Function Settings:
Function Settings:
Function Settings:
Tap
Transmit
, when checked, it means the function is
enabled.
Tap
RF set to be on by default
, when checked, it means the
function is enabled.
Note: If this option is not selected, the system displays a
message, indicating whether to enable the transmitting function
when the transmitter is turned on.
Note: This function is available for version 1.0.28 or above.
1. Enter
RF Alarm Settings
menu
.
2. Tap the box next to the switch to select an appropriate
position, then click to return.