Website
37
7.14 Channels Delay
This function is generally used to reduce the instantaneous large speed of the servo.
7.15 Pro. Mixes
A new special control combo can be created to correct the disadvantages of the model. You can select a stick/knob
or a function as a Master. When selecting a function, you can set whether the trim affects the Slave. The function can
be used to set the servo change of the Master mapping to the Slave channel through a custom curve. You can set a
switch to enable/disable the Mix, and set the delay to enable/disable the Mix function.
Function Settings:
1. Click the channel you want to set.
2. Click + / - to change the delay time to an appropriate
point, then click to return.
After setting delay, when toggle
the control, the menu is as below.
Represents the input value.
Represents the output value.
3
4
5
6
7
2
1
1.
Tap to enter the setting menu
2.
To assign mixing switch
3.
Click to enter the corresponding
menu of
Master
4.
Click to enter the corresponding
menu of
Slave
5.
To turn on or turn off the trim
6.
Click to enter the
Mixes delay
setting menu
7.
Click to enter the
Curve
setting menu