Website
27
This function is used to set the external device with
supporting i-BUS protocol, and the Serial Bus Receiver
(FS-CEV04) and can be set currently. When using i-BUS
serial bus receiver, it reccomends to power it separately.
7.4.10 i-BUS Setting
7.4.11 Servo Midpoint
This function sets the value of the servo's midpoint. The
default is 1500, which is suitable for most flight control of
racing drones. When using standard S.BUS with a device
such as the Vbar gyro fight controller it can be set to 1520,
to achieve the midpoint offset for all channels.
1. The transmitter and the receiver have bound.
2. Connect the FS-CEV04 to the
SERVO
port or the Newport
set to
i-BUS-OUT
of the receiver.
3. At the transmitter side, select the channel you want to
assign via
i-BUS setting
, a pop-up prompt window will
appear. If the channel is wrong, click
Cancel
, then select a
new one.
4. If the selected channel is about to assign to C1 channel of
the Serial Bus Receiver FS-CEV04, then press the button
K1 corresponding to C1 channel of FS-CEV04 receiver by
the tool shipped with the bind cable.
5. Repeat the steps above for setting more channels.
Function Settings:
Function Settings:
1. E
enter
Midpoint offset
menu
.
2. Click an appropriate item, tap to return.