Flyer Upstreet 5, Instructions Manual

Page: 282 / 401

37
EN
Prevent extreme overheating due to ex -
ternal effects or overloading.
• Only use the battery with your FLYER .
• Never use a damaged battery . If you
discover cracks, deformation of the
housing or leaks, stop using the bat-
tery and have your FLYER checked
by a specialist retailer . Damaged bat-
teries must not be posted .
• The lighting function will still continue
for approx. one hour after the battery
is empty .
5.28 seat tube battery STB
1 LED charge status display
Shows the battery’s remaining charge . If an error
occurs, an error code is displayed (see Chapter
5 .2 .9 Battery error codes)
Akkuladestandsanzeige
Jede leuchtende Akkuladestandsleuchte steht für ca . 20 % der Akkukapazität .
Akkuladestandsleuchten
5 an 4 an 3 an 2 an 1 an 1 blinkt*
1
5 an 4 an 3 an 2 an 1 an 1 blinkt*
1
Anteil der Akkukapazität
im Vergleich zum voll
geladenen Akku
81 % bis 100 % 61% bis 80% 41% bis 60% 21% bis 40% 11% bis 20% 1% bis 10%
*
1
Wenn keine Restkapazität mehr im Akku vorhanden ist, blinkt eine Akkuladestandsleuchte schnell .
Akkuladestandsanzeige
Jede leuchtende Akkuladestandsleuchte steht für ca . 20 % der Akkukapazität .
Akkuladestandsleuchten
5 an 4 an 3 an 2 an 1 an 1 blinkt*
1
5 an 4 an 3 an 2 an 1 an 1 blinkt*
1
Anteil der Akkukapazität
im Vergleich zum voll
geladenen Akku
81 % bis 100 % 61% bis 80% 41% bis 60% 21% bis 40% 11% bis 20% 1% bis 10%
*
1
Wenn keine Restkapazität mehr im Akku vorhanden ist, blinkt eine Akkuladestandsleuchte schnell .
1
3
4
2
2 Control button for battery charge level
Let the LED battery charge level indicator blink to
verify the remaining battery power .
3 Charger port
4 Rubber cap
Protects the connectors for the charger when the
battery is not being charged .
Check whether the battery is fully char-
ged after you have purchased it and be-
fore using it for the first time.
To check if the battery is charging, press the con-
trol button to be shown the battery charge level .
Charge the battery when none of the LEDs light
up . Only use the original charger . Never use char-
gers supplied by third-party companies .
Charging status indicator
The charging status of the battery is indicated by
five LEDs.
A fast-flashing LED indicates that the battery has
been completely discharged .
Removing the battery
1) Switch off the electrical system first. Press
the on/off button for this purpose.
2) Unlock the battery with the battery key and
remove it from the holder. Hold the battery firmly,
as it is heavy .