![background image](http://html.mh-extra.com/html/ingrid/crs-pop/crs-pop_manual_2061281001.webp)
Rev. 1.0 2021/07
CRS Manual EN
SPECIFICATION
IMPORTANT NOTICE
MAINTENANCE
This product is not guaranteed against natural wear and deterioration from
normal use and aging.
!!! PERIODICALLY CHECK THE TIGHTENING. INCORRECT
TIGHTENING CAN CAUSE MALFUNCTIONS OR BREAKAGE
Make sure to read all instruction manuals included with the product.
This manual is intended primarily for use by professional bicycle
mechanics. Users who are not professionally trained for bicycle assembly
should not attempt to install the components
If any part of the information on the manual is unclear to you, do not
proceed with the installation. Instead, contact your dealer or a local bicycle
shop for their assistance.
You can find all the manuals and specs on our website http://ingrid.bike
MOSCONI s.r.l. | via la Villa 28 zona artigianale Ghilardino 61034 Fossombrone, PU
- BB-PF8200
(ceramic)
+ El226
(adapter)
We recommended to use the following
bottom bracket and spacer:
FSA
-
- BB-EVO7000
BSA (68/73 mm)
- BB-EVO9500
(ceramic)
-
Press Fit 30 (68/73 mm)
- BB- El226
(adapter)
-
BB30 (68/73 mm)
- BB- El226
(adapter)
- BB-OS8200
(ceramic)
+ El226
(adapter)
-
Press Fit BB92 (92 mm)
- EL237
-
Press Fit BB89.5 (89.5 mm)
- EL237 + MW114
(spacer)
To use the CRS-POP with bottom bracket not included in this list, check
that the k-factor respects the dimensions required for our spindles
To install the bottom bracket refer to the manufacturer’s manuals.
BOTTOM BRACKET SPECIFICATION
OUR CRANKSET SYSTEM IS DESIGNED WITH
AN ASIMMETRY OF +2.5MM ON DRIVE SIDE
The common MTB frames/BB cups are asymmetrical and that
provides the necessary configuration (fig.1)
The common ROAD frames/BB cups are symmetrical.
In this case add 2.5 mm on the drive side (fig.2)
VERIFY THAT THE FRAME/BB CUPS COMPLIES WITH THE REQUIRED
DIMENSIONS FOR OUR SPINDLES
ROAD
Total width of the bottom bracket
DS
NDS
IF NECESSARY,
ADJUST THESE
DIMENSIONS USING
THE INCLUDED
SPACERS
L131
Spindle
44.5mm
~89 mm
44.5mm
+2.5mm
(2 x included spacers)
Total width of the bottom bracket
DS
NDS
L136
Spindle
MTB
49.5mm
~96.5mm
47mm
IF NECESSARY,
ADJUST THESE
DIMENSIONS USING
THE INCLUDED
SPACERS
fig.1
fig.2