Flybox Eclipse, Installation And Operating Manual

Page: 27 / 72

: set the top limit of the CHT gauges.
: set the transition temperature from high yellow to red zone of CHT gauges.
: set the transition temperature from green to high yellow zone of CHT gauges.
: set the transition temperature from low yellow to green zone of CHT gauges.
: set the bottom limit of the CHT gauges.
NOTE:
This values must be adjusted depending on the cooling liquid used.
•
EGT GAUGE SETUP
•
OIL TEMPERATURE GAUGE SETUP
Max
: set the top limit of the oil temperature gauge.
High
: set the transition temperature from high yellow to red zone of the oil temperature gauge.
Mid
: set the transition temperature from green to high yellow zone of the oil temperature gauge.
Low
: set the transition temperature from low yellow to green zone of the oil temperature gauge.
Min
: set the bottom limit of the oil temperature gauge.
Clearance
: setpoint to allow warming the oil before takeoff. Below this setpoint the number is blinking to indicate that the oil has
not yet reached the minimum temperature for take off.
27
Min
Low
Mid
High
Max
MidLow
Low
Mid
High
Max