CON2 connections
TABLE2 CON2 CONNECTIONS
Pin #
Description
1 +12 V for current sensor
2 Current sensor signal input
3 GND for fuel flow sensor
4 +12V for fuel pressure sensor
5 Fuel pressure sensor input
6 LEFT Televel input
7 GND
8 MAIN Televel input
9 GND
10 Oil temperature sensor input
11 OAT (outside air temp.) sensor input
12 Low-level intercom audio out (use shielded wires)
13 GND for video input #1
14 +12V for camera #1
15 Video input #2
16 GND for video input #3
17 +12V for camera #3
18 Open-collector alarm-out (active low) max 400mA / 5W
19 RPM pickup input
20 GND for current sensor
21 +12V for fuel flow sensor
22 Fuel flow sensor input
23 GND for fuel pressure sensor
24 +12V for capacitive fuel level sensor (if used)
25 RIGHT Televel input
26 +12V for capacitive fuel level sensor (if used)
27 Not used/Reserved
28 Oil pressure sensor input
29 CAT (carburator air temp.) sensor input
30 GND for low-level intercom audio out (use shielded wires)
31 GND
32 Video input #1
33 +12V for camera #2
34 GND for video input #2
35 Video input #3
36 Not used/Reserved
37 GND
12
Summary of Contents for Eclipse
Page 6: ...ECLIPSE PART I INSTALLATION 6 ...
Page 7: ...2 Dimensions 7 ...
