Fluke 5820A, Operator'S Manual

Page: 164 / 272

5820A
Operators Manual
6-22
Response: <value> (decimal equivalent of the 16 bits, 0 to 32767)
Example: ISCR1? returns 4108
Return decimal 4108 (binary 0001000000001100) if bit 12 (SETTLED) is set to 1.
ISR?
(IEEE-488, RS-232)
(Instrument Status Register query) Returns contents of the Instrument Status Register.
Response: <value> (decimal equivalent of the 16 bits, 0 to 32767)
Example: ISR? returns 4108
Return decimal 4108 if bit 12 (SETTLED)is set to 1.
LOCAL
(RS-232)
(Local command) Puts the 5820A Calibrator into the local state, clearing the remote state
(see the REMOTE command) and front panel lockout (see the LOCKOUT command).
This command duplicates the IEEE-488 GTL (Go To Local) message.
Parameter: (None)
Example: LOCAL
Set the instrument into the local state, clearing the remote state and front panel lockout (if
enable).
LOCKOUT
(RS-232)
(Lockout command) Puts the 5820A Calibrator into the lockout state when in remote
control (see the REMOTE command). This means no local operation at the front panel is
allowed during remote control. To clear the lockout condition, use the LOCAL
command. This command duplicates the IEEE-488 LLO (Local Lockout) message.
Parameter: (None)
Example: LOCKOUT
Set the instrument into the front panel lockout state. The front panels controls cannot be
used.