Fluke 5820A, Operator'S Manual

Page: 127 / 272

Remote Operation
Using Commands
5
5-33
5-36. Command Syntax
The following syntax rules apply to all the remote commands. Information about syntax
of response messages is also given.
5-37. Parameter Syntax Rules
Table 5-9 lists the vocabulary of units accepted in command parameters and used in
responses. All commands and units may be entered in UPPER or lower case.
Table 5-9. Units Accepted in Parameters and Used in Responses
Units Meaning
HZ Frequency in units of hertz
KHZ Frequency in units of kilohertz
MHZ, MAHZ Frequency in units of megahertz
GHZ Gigahertz
UV Volts in units of microvolts
MV Volts in units of millivolts
V Volts in units of volts
KV Volts in units of kilovolts
PCT Percent
PPM Parts-per-million
DBM Volts in units of decibels referenced to 1 milliwatt into 50 Ω load
OHM Resistance in units of ohms
KOHM Kilohm
MOHM Megohm
NS Period in units of nanoseconds
US Period in units of microseconds
MS Period in units of milliseconds
S Period in units of seconds
PS Picoseconds
F Capacitance in units of farads
PF Picofarad
NF Nanofarad
UF Microfarad
MF Millifarad