Fluke 522A/6, Operator'S Manual

Page: 379 / 426

PQ Option
Composite Harmonics Function (Volts)
11
11-9
RECALL WAVE
Pressing the RECALL WAVE blue softkey displays the menu shown below. From this
menu, the user can:
•
recall the 2 preinstalled IEC waves
•
recall the 5 preinstalled NRC waves
•
recall up to five custom user-created waves
nn354f.eps
SAVE WAVE
Pressing the SAVE WAVE blue softkey displays the menu shown below. From this
menu, the user can save up to 5 custom-made waves, storing them in the calibrator non-
volatile memory.
nn355f.eps
NEW WAVE
Pressing the NEW WAVE blue softkey displays the menu shown below. From this menu,
the user can create new waves and adjust their individual parameters. More on this menu
can be found by referring to "Setting the Waves (Harmonics)" later in this section.
nn334f.eps
EDIT WAVE
Pressing the EDIT WAVE blue softkey also displays the menu shown above, or a similar
menu if a wave is already in use. From this menu, the user can adjust the individual
parameters of the waveform that is currently active. If no waveform has been selected
from one of the predefined sets or created using the NEW WAVE feature, the values are
initialized to their "off" states.
How to Create New Waves
Note
The procedures for creating a new wave and editing an existing wave are
essentially the same. The difference between the NEW WAVE and EDIT
WAVE menus is that under the NEW WAVE section, all harmonic
parameters default at "0" until the user changes those parameters thus,
creating a new wave.