manualshive.com logo in svg

Fluke 434-II, User Manual, Page: 83 / 174

Share
Download
Fluke 434-II User Manual Download Page 83

 

Monitor - Power Quality Monitoring

 

 

Trend Display

16

 

  

16-5 

The measurement data available under the Function keys is explained in the following 

sections. Data is presented in the formats Events Table, Trend Display, and Bar Graph 

screen. 

Trend Display 

 

Figure 16-2. Trend Display 

The Trend screen shows the changes over time of measuring values. Zoom and Cursor 

are available to examine Trend details. Zoom and Cursor are operated by the arrow keys 

and explained in Chapter 23. 
Available function keys: 

F1

 

Up/down arrow keys are assigned to scroll Trend screen. 

F2

 

Access to Events menu. The number of events that occurred 
is shown. 

F3

 

Access to cursor and zoom menu. 

F4

 

Return to bar graph screen. 

F5

 

Switch between HOLD and RUN of screen update. 
Switching from HOLD to RUN invokes a menu to select 
immediate (NOW) or TIMED start time which allows you 
to define start and duration of the measurement. 

 

Events Table 

 

Figure 16-3. Events Table 

The events table shows the events that occurred during the measurement with date/time 

of start, phase, and duration. The amount of information in the table can be selected with 

the Function key F3. 

1.800.868.7495

[email protected]

Fluke-Direct

.ca

Summary of Contents for 434-II















































































































































































Reviews:

No comments