Fluke 434-II/435-II/437-II
Users Manual
8-2
The figures in the Meter screen are present values that may update constantly. Changes in
these values over time are recorded as soon as the measurement is turned on. The
recording is visible in the Trend screen.
Logging. All measuring values in meter screen are logged. Refer to Chapter 3, paragraph
Logging of Measuring Values for more information.
The Cycle Aggregation Interval for rms based measurements such as Vrms and Arms can
be set to 10/12 cycles or 150/180 cycles. To adjust press in sequence: the SETUP key, F4
– MANUAL SETUP, F3 – FUNCTION PREF and the up/down arrow keys to select
Cycle Aggrega(tion) and use the left/right arrow keys to adjust.
Available function keys:
F1
Up/down arrow keys are assigned to scroll Meter screen.
F3
Access to the Trend screen. For description see below.
F4
Access to the Events screen. The number of events that
occurred is shown. For description see below.
F5
Switch between HOLD and RUN of screen update.
Switching from HOLD to RUN invokes a menu to select
immediate (NOW) or TIMED start time which allows you
to define start and duration of the measurement.
Trend
To access the VOLTS/AMPS/HERTZ Trend screen:
e
F3
All values in the Meter screen are recorded, but the Trends from each row in the Meter
screen are displayed one at a time. Press Function key F1 to assign the up/down arrow
keys to row selection.
The traces build up from the right side. Readings in the header correspond to the most
recent values plotted on the right.
Available function keys:
F1
Up/down arrow keys are assigned to scroll Trend screen.
F2
Access to cursor and zoom menu.
F3
Return to Meter screen.
F4
Access to Events menu. The number of events that occurred
is shown. For description see below.
1.800.868.7495
Fluke-Direct
.ca