8 - 12
91/92/96/99/105
Users Manual
To see the block of four pulses in detail, increase the time
base and use pretrigger delay:
7.
Press
to increase the time base to 2ms/DIV.
8.
Press .
9.
Use
to highlight "time delay", and press
to select.
10.
Use
to adjust the time delay to -7 divisions
(refer to Figure 8-8).
Adjusting the time delay to -7 divisions has moved the
trigger point to the seventh division on the display, and you
now see seven divisions of information that occur before
the trigger. (See Figure 8-8.) You can use Zoom to look at
the falling edge detail of the 50% pulse. The Zoom function
expands the trace referenced to the fourth time division
and automatically adjusts the delay.
11.
Press .
12.
Use
to highlight "scope zoom", and press
to select.
13.
Use
to zoom in the waveform.
Figure 8-8 Time Delay -7 Divisions