4 - 2
91/92/96/99/105
Users Manual
MAKING CONNECTIONS
ScopeMeter test tool measurement connections are illus-
trated in Figure 4-1.
Use the red INPUT A BNC jack for Scope and Meter
modes. Use the grey INPUT B BNC jack as a second input
for Scope measurements
. The red and black 4-mm
banana jacks are used for
,
, and
modes.
For low frequency measurements (up to about 2 MHz),
ground can be connected to the black 4-mm banana jack.
For higher frequencies you must use the HF Adapter or
Mini Testhook on the probe.
When you use the PM8918 probe, select the 10:1 probe
type for correct decimal readout.
Figure 4-1 Measurement Connections
91
91
Scope only