3 - 2
91/92/96/99/105
Users Manual
MAKING CONNECTIONS
ScopeMeter test tool measurement connections are
illustrated in Figure 3-1.
Use the red INPUT A BNC jack or the red and black 4 mm
banana jacks for measurements. The ScopeMeter test tool
informs you when to use INPUT A or the banana jacks.
The red 4-mm banana jack is used for diode test, continuity
test, Ohm measurement, and when you use a Current or
Temperature probe with banana jacks.
When you use the PM8918 probe, select the 10:1 probe
type for correct decimal readout.
Figure 3-1 Measurement Connections