7 - 6
91/92/96/99/105
Users Manual
To see the current as a waveform, set the test tool as
follows:
➀
Set Current Probe range switch to 10 mV/A.
➁
+
Do a Reset; probe scaling factor is 10:1.
➂
Select Scope mode.
➃
Select Continuous Auto Set.
➄
➪
Select the Probe A menu.
➅
Open the Probe on INPUT A box.
➆
:10
mV/A
➪
Select current range.
➇
Close the window.
➈
The test tool displays the current as a waveform,
which can be analyzed using all other functions. The
selected range appears on the top display.
Figure 7-5 Current Measurement in Scope Mode