ScopeMeter Test Tool Tutorial
8 - 21
To start the Single Shot measurement:
10.
Press
The display is first cleared, the rising edge of the pulse is
now captured, and the ScopeMeter test tool has returned
to the HOLD mode (see Figure 8-14). To capture the falling
edge of the pulse in the Single Shot mode:
11.
Press .
12.
Press
to
select
the
-
SLOPE.
13.
Press
to
start
the
Single
Shot.
You can now see the difference in the speed of the rising
and falling edges of this waveform. Note that in the Startup
menu window you can configure the ScopeMeter test tool
to clear the display each time a new Single Shot is started.
To find the Startup menu from the More User Options
window, first press
, and then
.
Figure 8-14 Single Shot Measurement