Flowserve SIHI dry Standard H Series, Instruction & Operation Manual

Page: 76 / 82

Flowserve US Inc.
SIHI
dry dry dry dry Standard Standard Standard Standard M Series
Dry Running Vacuum Pump
Issue Date: November 21, 2016
Copyright:
FLOWSERVE SIHI Pumps
77
272 Excess temperature of right
motor Temperature monitoring Check the operating behavior of the system Operator
1121 START ENABLE/
EMERGENCY STOP
The MAXIMUM set point for
temperature Check the operating conditions of the plant. Operator
1122 START ENABLE/
EMERGENCY STOP
The MAXIMUM set point for
temperature sensor 2 has been Check the operating conditions of the plant. Operator
1123 START ENABLE/
EMERGENCY STOP
The MAXIMUM set point for
temperature sensor 3 has been Check the operating conditions of the plant. Control the
cooling loop. Operator
1124 START ENABLE/
EMERGENCY STOP
The MAXIMUM set point for
temperature sensor 4 has been Check the operating conditions of the plant. Operator
1125 START ENABLE/
EMERGENCY STOP
The MAXIMUM set point for
temperature sensor 5 has been Check the operating conditions of the plant. Operator
1126 START ENABLE/
EMERGENCY STOP
The MAXIMUM set point for
temperature sensor 6 has been Check the operating conditions of the plant. Operator
1127 START ENABLE/
EMERGENCY STOP
The MAXIMUM set point for
temperature sensor 7 has been Check the operating conditions of the plant. Operator
1128 START ENABLE/
EMERGENCY STOP
The MAXIMUM set point for
temperature sensor 8 has been Check the operating conditions of the plant. Operator
1141 START ENABLE/
EM.STOP PT1 MIN set
The MINIMUM set point for sensor 1
was reached. Check the operating conditions of the plant Operator
1161 START ENABLE/
EM.STOP PT1 MAX intake
The MAXIMUM set point was reached
for sensor 1. Check the operating conditions of the plant. Operator
1162 START ENABLE/
EMERGENCY STOP
The MAXIMUM set point was reached
for sensor 2. Check the operating conditions of the plant. Operator
1163 START ENABLE/
EMERGENCY STOP
The MAXIMUM set point was reached
for sensor 3. Check the operating conditions of the plant. Operator
1164 START ENABLE/
EMERGENCY STOP PT4
The MAXIMUM set point was reached
for sensor 4. Check the operating conditions of the plant. Operator
1165 PT5 MAX set point reached The MAXIMUM set point was reached
for sensor 5.
Check the operating conditions of the plant. Operator
1166 PT6 MAX set point reached The MAXIMUM set point was reached
for sensor 6.
Check the operating conditions of the plant. Operator
1167 PT7 MAX set point reached The MAXIMUM set point was reached
for sensor 7.
Check the operating conditions of the plant. Operator
1168 PT8
MAX set point reached
The MAXIMUM set point was reached
for sensor 8. Check the operating conditions of the plant. Operator