23
6.1.2.1.
Before Installing a Cable Management System on a New Wall-
Mounted Charging Station
1.
First, install the charging station. Refer to the
Installing the Pedestal and Charging Station
section
(
section 5.
) above and the
CoRe+ MAX Installation Guide
, as needed. Then, install the cable
management system as indicated in the Installing a
Cable Management System
section below.
OR
6.1.2.2.
Before Installing a Cable Management System on an Existing
Wall-Mounted Charging Station
1.
Install the cable management system as indicated in the
Installing a Cable Management System
section below.
2.
Determine where the wall mount (column) will be placed. Leave 12’’ to 14’’ (30.48 cm to 35.56 cm)
between the column and the charging station. See the product measurements in the section below.
3.
Determine the required wall attachment hardware (wall anchors, screws, and washers) to securely
attach the mount brackets to the wall. Use ¼’’ diameter screws and anchors of the appropriate size if
the screws cannot be secured directly to a wall stud.
RECOMMENDATION
: Install the column at least 6’’ (15.24 cm) from the ground to allow enough clearance to
facilitate floor cleaning. The upper wall mount bracket should be installed at least 60’’ (152.4 cm) above the
lower wall mount bracket.
Summary of Contents for CoRe+
Page 1: ...1 x Pedestal and Cable Management System Installation Guide TM ...
Page 8: ...8 3 1 2 Dimensions The image below shows the dimensions of the pedestal ...
Page 24: ...24 Measurements for the CoRe MAXon a Wall Mounted Installation ...
Page 47: ...47 9 2 Multiple Pedestals Multiple Devices on Separate Electrical Circuits Grounding ...
