6
2.5.
Safety and Maintenance for the Pedestal and
Cable Management System Installation
IMPORTANT SAFETY INSTRUCTIONS – PLEASE DO NOT DISCARD THESE INSTRUCTIONS
Read this section carefully before installing the pedestal.
1.
This pedestal was designed to be ground-based. It must be mounted on a non-combustible surface.
2.
Ensure the safe operation of the pedestal by grounding it. It must be connected to a grounding circuit
compliant with local regulations and installed by a certified electrician.
3.
Confirm with local authorities that the location where the pedestal will be installed is free from
underground pipelines or electric equipment to avoid inflicting serious injuries.
4.
Contact a certified contractor, a certified electrician, or a trained installer to ensure compliance with
local building codes, regulations, security standards, and weather conditions.
5.
This pedestal was designed to meet the requirements of the Americans with Disabilities Act.
6.
Handle the parts with care, since they can be sharp-edged. Always use safety glasses and gloves
when unpacking and installing the pedestal.
7.
Always use proper lifting techniques and wear safety boots during the installation. Some parts are
heavy and could cause injuries.
Summary of Contents for CoRe+
Page 1: ...1 x Pedestal and Cable Management System Installation Guide TM ...
Page 8: ...8 3 1 2 Dimensions The image below shows the dimensions of the pedestal ...
Page 24: ...24 Measurements for the CoRe MAXon a Wall Mounted Installation ...
Page 47: ...47 9 2 Multiple Pedestals Multiple Devices on Separate Electrical Circuits Grounding ...
